Instructions

Bin Tops Kits
HID - Button Activated Dispensing Conversion Kit - 17-3732-01
3/8 Water Regulating Valve Repair Kit #11-0559-01
BH1100, BH1300 & BH1600 Baffle Instructions
Bin Thermostat Add on for all Prodigy Nugget units with Coke Freestyle Countertop "FS7000"
Ice Slide for ED/DF200/250 Dispensers - 17-3069-01
Fan Relay Kit Used To Operate Two Remote Condensers - KCMR230 -
Prodigy Service Controller, fits all Prodigy cubers - 17-3513-01
Water Regulating Valve Replacement - 17-3483-01
Floor Mounting Kits KUFM - 15, 20 an d 24 inch Units - 17-3474-01
Harvest Assist Solenoid Replacement (2010 Recall) - 17-3326-01
Ice Deflector - A40403-021
Adding filters on ERC111 or ERC311 - KCREF - 17-3309-01
Speedy Bagger BGS10 - 17-1830-01
KFSPP - EH222 Prodigy Plus on Coke Freestyle - 17-3593-01
11-0616-21 Bin-Stat - 17-3494-01
11-0619-21 Cube Size Control - 17-3493-01
3RTE20-EH, 3RTE35-EH, 3RTE50-EH and 3RTE75-EH - 17-3156-01
A37705-021 Change from a Metal Drip Pan to a Plastic One - 17-2778-01
A37749-001 Installation on Models CME256, CME506, CME656 or CME806 - 17-2806-01
A39462-021, KPU090 and DPFGIM - 17-3265-01
Addition of a Head Pressure Control Valve to a Remote Condenser that does not have a Head Pressure Control - 17-3308-01
Auger, Bearings and Water Seal Replacement - 17-3316-01
Automatic Harvest Time Adjustment Kit - 17-2518-01
BH1100, BH1300 BH1600 Upright Bin Installation
Bin Top kit - KBT40 and KBT41 - 620201207
KSS - DCE33 Stainless Steel Wrap-Around Door Kit - 17-2802-01
Changing the Control Board from its Original Configuration to the AutoSentry System - 17-2813-01
CME 30" Air infiltration Kit - A38015-001 - 17-2969-01
CME 48" Air infiltration Kit - 17-2883-01
CME306, CME456 - KSTAT-22 Bin Thermostat Kit - 17-2817-01
Connection of a CME306 or a CME456 to a 30" Wide Lancer Ice and Beverage Dispenser - 17-2783-01
Prodigy Service Controller, fits thru C series - 17-3109-01
CU0415, CU0715 and CU0920 Controller Replacement - 17-3425-01
Custom Panel for Models SCC30, SCC50 and SCN60 - 17-3249-01
DC33, DCE33, RF33, RFE33 - Panel Dimensions
Door Replacement - 17-3245-01
Drain Pump Kit - DC Models - A36399-020 - 17-2351-01
Drain Pump Kit - DCE D Series - 17-3363-01
Drain Pump Kit - DCE Models A thru C - 17-2426-01
EPR Setting - 17-3570-01
Filler Trim Installation - 2185923
Floor Mounting Kits - 15 and 20 inch - 17-3474-01
Harvest Assist Mechanism Replacement - 17-3426-01
Harvest Assist Solenoid Replacement - 17-3288-01
Head Pressure Control Add-On Kit - 17-2711-01
Hotel Dispenser Sanitary Lever KHDSANLV - 17-3734-01
Head Pressure Control Add-On Kit - 17-2985-01
Ice Maker Trim Kit - 2185921
KPUFM26 and KPUFM30 - 17-3287-01
KSB - 17-3137-01
KSBU - 17-3295-01
KSBU-N - 17-3184-01
KSBU-N - 17-3296-01
KFMI Ice Chute Extension Kit
KSCME6-LG-B - 17-2864-01
KSP5 - 17-2871-01
KSTAT-MD - 17-2649-01
KTPS Baffle - 17-3327-01
Line Set Routing and Installation - 17-3463-01
MDT Portion kit - KPC-MDT Portion Control Kit - 17-3040-01
Nugget Ice & Dispenser Kit KDIL-N-200 and KDIL-N-250 - 17-3049-01
Nugget Ice & Dispenser Kit KDIL-N-CFF - 17-3136-01
Nugget Ice & Dispenser Kit KDIL-N-ID2 - 17-3051-01
Nugget Ice & Dispenser Kit KDIL-N-ID3 - 17-3233-01
Nugget Ice & Dispenser Kit KDIL-N-L - 17-3046-01
Nugget Ice & Dispenser Kit KDIL-PN-150 - 17-3300-01
Nugget Ice & Dispenser Kit KDIL-PN-200 and KDIL-PN-250 - 17-3299-01
Nugget Ice & Dispenser Kit KDIL-PN-ID3 - 17-3301-01
Nugget Ice & Dispenser Kit KFSMF Scotsman Nugget Ice on Freestyle Kit - 17-3477-01
Nugget Ice & Dispenser Kit KFSTM Scotsman Nugget Ice on Freestyle Kit - 17-3476-01
Nugget Ice & Dispenser Kit KNUGDIV
Old 2 light F/N Circuit Board Tester - 17-1968-01
Placement of a Scotsman Ice Machine on the BH1100, BH1300, or BH1600 Ice Storage Bin - 17-3011-01
Printed Circuit Board Handling Precautions - 17-2307-01
Prodigy Articulated Curtain Kit for all 18" evaps. - A39843-001 - 17-3346-01
Replacement of the CM3 Controller - 17-2886-01
Replacement of the Ice Thickness Sensor Assembly - 17-3125-01
Replacement TDE Circuit Board - 17-2433-01
Replacement Transformer - 17-2520-01
Replacing the Electro-Mechanical Timer and Switch with a Time Delay Relay - 17-3355-01
Reusing An Existing Consumer Door Panel - 17-3292-01
Scotsman Custom Overlay Panel Spec
SmartLock Control - 17-3142-01
Stacking - 17-2646-01
Tamperpoof Exterior Screws - 17-3420-01
TDE,NDE,ND Wall Mount Kit - KWB3
TPDL1 Prodigy Smart-Board Datalogger - 17-3139-01
TPDL2 Prodigy Smart-Board Datalogger - 17-3297-01
Two Piece Articulated Curtain - 17-3362-01
Vari-Smart Control KVS - 17-3138-01
Water Glass Filler Kit - KWGFID- 620201012
HD30, HD30 Brace retrofit kit, A39517-021 and A39517-022 - 17-3274-01
Prodigy Plus Cuber Controller Replacement - 17-3513-01
Prodigy Plus F&N Controller Replacement - 17-3560-01
Prodigy Plus Ice Type Conversion Kit (NH, NS, and FS Models) - 17-3714-01
Cube Size Thermostat used on SCC30 and others - 17-3279-01

Bin Tops Kits

Bin tops info chart
ICS730, ICS1360, ICS1790 Bin Top Installation
BL1048, BL1360, BL1660 Bin Top Installation
KBLCM3-30 - Use with a CME256, 506, 656, and 806 to IBD30
KBT14A - Use with a 42" wide modular cuber, modular nugget, or flaked ice machines onto a 48" wide bin
KBT22 - Use with a 30" wide modular cuber, modular nugget, or flaked ice machines onto a 48" wide bin
KBT22B - Use with a 30" wide modular cuber, modular nugget, or flaked ice machines onto a 48" wide bin
KBT24 - Use with a 21" wide modular nugget or flaked ice machine
KBT27 - Use with a 22" wide ice machines on 30" wide bins
KBT28 - Use with a 21" wide deep flake or nugget ice machine onto a B842 ice storage bin
KBT29 - Use with a 30" wide cuber onto a B842 ice storage bin
KBT32 - Use with a CME686 or CME810 or EH222 onto a 30" wide ice storage bin or an HD30
KBT33 - Use with a CME686 or CME810 or EH222 onto a B842 ice storage bin
KBT34 - Use with a CME686 or CME810 or EH222 onto a B948 ice storage bin
KBT34-2X - 17-3229-01
KBT37-2X -17-3286-01
KBT38 - Use with a 22" wide modular nugget or flaked ice machine
KBT38-2X - Use with two 22" wide modular ice machines on a 48" wide ice storage bin.
KBT39 - Use with 22" wide deep flake or nugget ice machine onto a B842 ice storage bin
KBT40 - Use with ID150 and CME686 or CME810 or EH222
KBT41 - Use with ID200 or ID250 and CME686 or CME810 or EH222
KBT42 - Use with ID150 and C0322, C0522, C0722, N0422, N0622, N0922, N1322
KBT43 - Use with ID200, ID250 and C0322, C0522, F0522, F0822, F1222, F1522, N0422, N0622, N0922, N1322
KBT44 - Use with ID200, ID250 and C0330, C0530, C0630, C0830, C1030, CME256, CME506, CME656, CME806, CME1056
KBT46 - Use with ID200, ID250 and NME454, NME654 or NME954
KBTABS - Use with ABS and CME686 or CME810
Kit application chart - cube ice machine to dispenser or bin
Kit bin top info chart